Showing posts with label feeding. Show all posts
Showing posts with label feeding. Show all posts

Thursday, May 12, 2016

Check Watering and Feeding Equipment as Your Birds Age



How you make a presentation counts


photo:
www.avianaquamiser.com
The birds we commonly use for meat and eggs do not have valves in their throats as we do.  Because of this, chickens, ducks and turkeys (to name a few) have to swallow food and water upright or throw the food to the back of the throat in a jerking motion like a woodpecker at a log.  To aid in feed conversion and water spillage, positon trough waterers and feeders lip height at the base of the bird’s neck or slightly higher so that the bird doesn’t waste feed and water standing up.



Nipple drinkers are a special case.  They should be set at the eye of the bird so that the birds jaw is below the level of the pin of the nipple drinker.  This will aid in controlling water spillage from this type of watering system.  Bell type watering systems should be adequately weighted to keep from swinging too much.

Feeders should no more that 1/3 full, and placed with the lip of the feeder even with the base of the neck of the bird.  If using a trough raise the feeder on blocks or similar structure to bring the food up to make it easier for the birds to eat.  Pasture should be long enough for the birds to easily pull on young blades of forage. 

Thursday, August 9, 2012

Feeding and Watering Adjustment for Success



http://www.plassonpoultry.com/plassonPoltryImages/Plasson%20Bell%20Drinkers/TURKY-NEW.jpg
Source: Plasson, inc.
You are What You Eat

With the rising heat and feed costs we look at every way to help conserve feed.  Feed and water waste should be avoided as any spilled feed is an open invitation to pests coming in for a meal.  Darkling beetles and other pests feed off of spilled feed and water spots in bedding before breeding and destroying a wooden structure.

The birds we use for food do not have valves in their esophagus as humans, so they need to tip up their heads as they drink and eat.  Positioning feeder and drinker levels to be at or just above where the neck meets the body is a preferred feeding method.  Be sure that bell-type drinkers are adequately weighted in their ballasts to prevent spillage.  Use a waterer location rotation program with these hanging drinkers to help eliminate wet spots in the litter.

http://www.ziggity.com/pinc/get_image.php?app_code=cont&filename=cont_bird_type_content_image_3.jpg
Source: Ziggity, Inc.
 Nipple drinkers should be positioned and adjusted so that birds can reach up to drink.  By doing so, the birds can drink naturally with the water flowing down their throats and without the need for moving with their mouths full of water.  Leveling the system as you move through the house is important to help eliminate and air blockages and "weeping" drinkers.

Fount type drinkers that sit on the floor can be raised using blocks and other supports to help raise the equipment to the proper feeding level.  Having the equipment adjusted as the bird ages ensures that feed and water are properly being delivered.